3D printing can seem like magic: you press a button, and a few hours later you have an object that didn’t exist before. But here’s the secret: there is no magic involved. Once you see how it all works, you’ll realize that you can go from idea to object too, with only a little work.
1. Start with a small idea
The best first prints are small and useful: a keyring, a hook, a cable clip, a name tag, a replacement for a broken plastic part. Something that fits in your hand, and ideally something that you’ll actually use. Bigger, more complicated objects can wait.
2. Make a 3D model
The first thing a 3D printer needs is a digital model of the thing you want to make, and fortunately there are two easy ways to get one.
Design it yourself. You don’t need expensive software. Tinkercad is a free application that runs in your web browser, so there’s nothing to install. At its simplest, you build objects by combining basic shapes: a box, a cylinder, some text, a hole or two. It’s where we start every beginner, because nothing keeps you going like a first design that works. But don’t be fooled: Tinkercad is powerful software, and plenty of experienced makers never leave it behind.
Download one someone else made. There are several large libraries of free models online (our favorites are Printables, Thingiverse, and Thangs), each containing thousands of objects designed, tested, and shared by other makers. It’s a great way to print something quickly, and to see how others have solved a problem. The 3D printing community is built on open source, and sharing is at its heart, so we encourage our students to share their designs too.
Either way, you end up with a file, usually in STL or 3MF format, that describes the shape, or geometry, of your object. But that’s still not quite enough for the printer to do its thing.
3. Slice it into layers
To print your object, the printer needs a precise list of movements: go here, squeeze out this much plastic, go there. Another program, called a slicer, turns your model into those instructions. It cuts, or slices, the model into hundreds of thin horizontal layers, then works out the path the printer has to follow to build each one.
The slicer is also where you make some important choices, such as:
- Layer height. Thinner layers look smoother, but take longer to print.
- Infill. Most prints are not a solid chunk of plastic, as that would be wasteful (and take forever to print). Instead, their insides contain infill, usually a geometric pattern like a honeycomb, which saves material and time while keeping the part strong.
- Supports. A printer can’t print in mid-air, so any parts that stick out will need temporary supports underneath them. Once the print is done, you snap these off and recycle them.
For slicing, we recommend OrcaSlicer, a free, open-source application built by other makers from around the world.
4. Print it
Most desktop 3D printers work the same way, using a method called FDM (fused deposition modeling) printing. A spool of plastic thread, called filament, is fed into a heated nozzle, part of the printer’s hot end, which melts it. The nozzle moves around and lays the melted plastic down in thin lines, one layer at a time, from the bottom up. Each layer bonds to the one below.
A small print can take twenty minutes; a large one can take a day or more.
What can go wrong
The most common surprises on a first print:
- The first layer doesn’t stick. Everything depends on the first layer. If it doesn’t grip the print surface (called the bed), nothing above it will work.
- Parts that stick out droop. Usually the print needed supports, or it could have been turned another way so it didn’t need them.
- Corners lift. Plastic shrinks as it cools, some kinds more than others, and that can pull the corners up off the bed.
- You come back to spaghetti. This is rarer as printers get better, but if the print comes loose partway through, or your temperature and speed settings are off, you might find a tangle of plastic strands where your print should be.
Not every print will turn out the way you hope, and that’s fine. Each failure teaches you something about what the printer needs, and learning what not to do is a big part of learning to print.
You made your own thing
The best part of 3D printing is the moment something you designed comes off the printer in one piece. You lift it off the bed, snap off any supports, and hold it in your hands. You made this: what started as an idea now exists as an object. That feeling is why we do this.
This is the path our first workshops will follow: from a small idea, through design and slicing, to a print you can take home. If you’d like to try it yourself, with someone right beside you to help, subscribe to our newsletter and we’ll tell you when the first dates go live.